interface control module
英 [ˈɪntəfeɪs kənˈtrəʊl ˈmɒdjuːl]
美 [ˈɪntərfeɪs kənˈtroʊl ˈmɑːdʒuːl]
网络 接口控制模块
双语例句
- Design on PCI Interface and Control Module of Digital Receiver
PCI接口及数字化接收机的控制模块设计 - The software is composed of interface module, control module and simulation module.
软件含接口、控制、仿真等模块，具有较强的可移植性和人机交互能力。 - Input/ output interface control module
输入输出接口控制模块 - The electronic part of filling petrol machine is composed of power module, custom control module, interface module, switch, control module, sensor, display module, keyboard, keyboard display and RTC etc.
加油机电脑装置主要由电源模块、税控模块、接线模块、开关、控制模块、传感器、显示模块、键盘及键显等组成。 - The control system is designed by module, which includes CPU core module, memory modules, debugging interface modules, data transmission module, human interface module, and electrical control module.
控制系统采用模块化设计，主要模块包括：控制核心CPU模块、存储器模块、调试接口模块、数据传输模块、人机交互模块、电机控制模块。 - Author introduces PCI bus protocol briefly in the sixth chapter, has expounded the processing of design that PCI target interface and target logic control module.
第六章简要介绍了PCI总线协议，详细论述了PCI从模式接口模块的设计实现过程和后端逻辑控制模块的设计实现过程。 - An Applied Design Method for Intelligent Interface and Test Control Module
实用智能接口及测控功能模块设计方法研究 - Analog input data acquisition and output interface are automatically gained by the FPGA. CAN-Bus interface designed in this Board. Several servo control digital interface module;
FPGA中自动完成模拟量输入的采集与存储及模拟量的输出接口，控制卡设计了CAN总线接口。 - Finally, the result of debugging, running and checking of MVB interface vehicle logic control module based on ARM reaches the goals of design and obtains satisfied effects.
最后，对基于ARM的MVB接口机车逻辑控制模块的调试、运行、验收结果表明，该模块的开发达到了设计目标要求，并取得了满意的效果。 - The general industrial control software includes graphic interface system, the third party program module, control function module and real-time database system module etc.
一般的工控软件包括图形界面系统、第三方程序接口组件、控制功能组件、实时数据库系统等组件。 - This dissertation designs this system in a structural way, which divided the over whole system into automotive dynamics and simulator interface module, control and actuator module, monitor and communication module.
论文采用结构化方法设计了横摆角速度硬件在环仿真系统。该系统包含了汽车动力学模型及接口模块、控制器和执行器模块、监测和通讯模块等三大部分。 - Finally, system framework and functional module interface of video decoder are analyzed, especially the SDRAM control module which is very related to prediction module.
最后分析了视频解码芯片的系统框架和各功能模块的内部接口，特别是对与预测模块有紧密联系的SDRAM控制模块做了分析与设计。 - Including the whole structure, the power module, the reset circuit, the Flash memory interface circuit, the SDRAM interface circuit, the serial interface circuit, the communication module, the chip microcomputer control module, etc.
包括整体结构、电源模块、复位电路、Flash存储器接口电路、SDRAM接口电路、串行接口电路、通讯模块、单片机控制模块等各个模块； - The system consists of graphic user's interface module, chief control module, samples-processing module, modal-recognition module, task-modal module.
结构损伤辨识系统主要由以下模块构成：用户界面模块、总控模块、样本处理模块、识别模型模块、问题模型处理模块。 - Three kinds of selected standard modules function modules, interface modules and a control module may be assembled in the CAMAC standard DATAWAY.
在CAMAC标准总线上可以安装标准化的可供选择的下列三种模件：功能模件、接口模件和控制模件。 - The general project and realization method of the HTLS system were confirmed, the high speed data signal simulator of the HTPF hardware-in-the-loop simulation system was designed, including PCI bus interface 、 center control module and driver of hardware system.
确定了半实物仿真系统的总体方案和实现方法，设计了硬目标侵彻引信半实物仿真系统的高速数据信号模拟器，包括PCI总线接口、核心控制模块及硬件系统驱动程序三部分。 - The structure of the software is divided into four modules, which are the interface control and display module, the data reading and writing module, the data processing module and the signal combining module. The principle and realization of eath module has been introduced respectively.
将软件划分为界面控制和显示模块、数据读写模块、数据处理模块和信号合成模块，分别介绍了各模块工作原理及实现方法。 - The interface control module implements the Universal Test Operations PHY Interface ( UTOPIA) Level 2 and the interrupts controller. It provides many kinds of control signals which the control board needs as well.
接口控制模块实现了UTOPIALevel2接口和中断控制器，并提供了控制板所需的多种控制信号。 - According to the principle in the co-design of hardware and software, the framework is divided into user interface module, physical layer interface control module, basic communication module and MAC protocol module.
该模块化设计按照软硬件划分的原则划分为用户接口模块、物理层接口控制模块、基本通信模块和MAC协议模块四大部分。 - Having the CAN bus interface, it makes the main control module can be mounted to the CAN-bus network, collecting the key signals which the instrument display system will need.
系统预留了CAN总线接口，使得主控制模块可以挂载到CAN总线网络，采集仪表系统需要的某些关键信号量。 - The system provides a flow control interface for operator to manage the sample flow control module which is mainly responsible for sample injection and liquid waste cleaning.
样本的流路控制模块主要负责样本的进样和废液的清洗，软件系统提供可由用户操作的流路控制界面，实现流路的自动控制。 - There are some modules in the interface software, such as serial communication port control module, data acquisition control module, data waveform display module, data storage module, data playback module and the system working state display module.
上位机监控程序的功能模块包括控制串口通信的模块、控制下位机数据采集子系统工作的模块、数据波形显示和数据保存模块以及数据回放和采集系统的工作状态显示模块。 - The test tool mainly consists of Shell module, interface drive& interface control module, message sending and receiving module and protocol control module.
该测试工具主要由Shell模块、接口驱动与接口控制模块、报文发送及报文接收模块、协议控制模块组成。 - I am responsible for voice communications and interface control management module. And voice and data transmission module are based on RTP protocol.
本人负责语音通信和界面控制管理模块，其中语音通信部分采用RTP协议进行语音数据的传输，界面控制部分采用QT设计，实现了利用图形界面来控制整个系统的运行。 - It is mainly composed of FPGA program design module, medium frequency front end process board, numerical AGC module, FPGA and DSP high-speed interface design and exterior display and control module.
主要包括FPGA端程序设计、中频前端处理、数控自动增益控制的实现、FPGA与DSP高速接口设计以及外部显示与控制模块的实现等。 - From the perspective of hardware design, specifically discussed are the design proposals of PCI interface module, Logic control module, Signal conditioning modules and D/ A converter module, and the implement method of hardware circuit.
在硬件设计方面，特别讨论了PCI接口模块、逻辑控制模块、信号调理模块、模数转换模块、数模转换模块等的设计方案和硬件电路的实现方法。 - The interface decoding module, the system D/ A control module and the waveform generate control module is designed in Quartus ⅱ integrated development environment with Verilog HDL which contribute to the high reliability and flexibility of the digital circuit.
在QuartusⅡ集成开发环境下使用Verilog硬件描述语言设计了接口译码模块、系统D/A控制模块和波形产生控制模块等逻辑电路，使数字电路具有很高的可靠性和灵活性。 - Developed the opening human-machine interface module which based on Windows and machine logic control module and movement control module which based on DSP.
开发了基于Windows的开放式人机界面模块、基于DSP的机械逻辑控制模块和运动控制模块。